Ferguson Regent TV7 - Manual (Page 15)

render reception impossible or considerably impair image/sound quality. Before installation
make sure that the location is suitable. The proper direction may be initially determined by
making a comparison with other antennas. There should be no objects directly in front of the
antenna, for these may block the signal from reaching the bowl! Once you select an optimal
location for the antenna, fix and adjust it initially, and then proceed to a precise adjustment.
7 Connect the tablet to a TV
Ferguson Tablet can connect to HD TV via
• HDMI cable (type C) – HDMI (type A)
or
• HDMI (type C) – HDMI (type A) adapter and standard HDMI (type A) cable
These accessories are not included with the tablet!
NOTE: In menu „Settings” > „HDMI” you can turn on/off screen clone mode
When you connected non-standard device (eg a computer monitor, a TV with DVI) and
there is no image, you can try change following settings:
- In menu „Application” > „HDMISwitch” you can change resolution on HDMI output
8 Factory reset
You can restore tablet to the factory state. Press in menu „Settings” > „Backup & reset” option
„Factory data reset”
NOTE: Restoring the factory default settings will erase all stored settings, user
accounts and install by user applications.
9 Firmware Upgrade by SDHC card
The latest firmware is available on the manufacturer's website. Unpack and copy to SDHC card
(in the tablet) the downloaded file. Then, proceed exactly as described in the accompanying
software update instruction.
NOTE:
Please keep in mind that new software may change the functionality of the tablet.
Photographs and descriptions included in the instruction manual are for informational
purposes only. If you should notice an error, please report it - we shall make every
effort to have it rectified.
15