Ferguson Ariva T65mini - Manual (Page 17)

10 TV System
This menu is used to set the image parameters. Above all, you should determine the resolution
of the image sent over the HDMI connection. Select the highest possible resolution supported by
your HD television set in order to obtain the best image quality.
Aspect ratio
Menu- System Aspect ratio →
Resolution
Menu- System Resolution →
If you are using a SCART connection, then for the
majority of older television sets we recommend setting
the video out to CVBS. If your television supports RGB,
then activate this option in order to obtain better image
quality over the SCART connection.
Additionally, in this menu you can choose the format in which the receiver will send sound over
the digital connections. We recommend using PCM in order to also receive a stereophonic signal
over the digital connections.
Menu- Option Digital Audio PCM/RAW, HDMI PCM/RAW, HDMI RAW/off → →
16