Ferguson FT-8100 HD User Manual
Page 11
11
Quic k Installation
Step 1: Check the cable connections
Prior to powering up the receiver, ensure that all cables are correctly connected. Ensure that the unit is
connected to A/V equipment and the power socket.
Step 2: Insert the CAM (with smart card) released by your se rvice provide r.
Inse rt the CAM into the slot according to the arrow direction drawn.
Note: Don’t attempt to remove or insert the CAM while the receiver is powered on or initializing.
Step 3:Turn on the television and tune it to relevant video mode.
Step 4: Power on and Set STB
Turn on power switch ON/OFF of your receiver. The startup OSD will be shown on the TV screen.
Receiver initialization includes loading of the embedded syste m parameters. If there are some
programs stored in the STB, channel numbe r will be shown on the LED area. Otherw ise , Install Guide
will show.
Use keys ▲▼ move the cursor, keys
change the item select.
Press