Ferguson FT-8300 HD - Manual (Page 17)

17
6. System Information
6.1 SW/HW Information
This OSD information shows the receiver’s basic information such
as manufacture, software and hardware version.
6.2 Common Interface
Shows CAM status information.
Note: The displayed information about common interface differs depending on the type of CI
and smart card.
6.3 HDD information
This OSD information shows the space of each partition and
guides you how to format or uninstall USB HDD.
Format: Press ▲/▼ key to select the your desired partition to
format by pressing key.
Format all: Press key to format all partitions into a FAT
file system partition.
Uninstall HDD: Press key to uninstall the USB HDD.
Remark:
The system only supports USB HDD in format FAT32.
If the system informs you to input password, please enter 888888 or 654321 to continue.
7. Record
This function requires the support of USB HDD, so you have to check up whether a USB HDD that is
FAT32 format has been connected to the USB interface.
Remarks:
•
Ensure that there is enough free space before recording. If the free space on the hard disk is
insufficient, recording will stop.
•
You can record radio programs also.
•
When recording, you can perform TimeShift function.
7.1 Start record
Press the key on the RCU, system will popup a dialog to confirm. When recording, a record icon
will be displayed on the screen.