Ferguson Ariva 120Combo - Manual (Page 19)

11.4 Single satellite search
In this menu you can search for channels from one selected satellite. To this end, select a
satellite by pressing the left/right arrow keys. Only satellites marked on the list of satellites will
be available. Next, select whether you want to search only for free to air channels or for all
channels, or for radio channels, television channels, or all channels.
Three search modes are available:
1. Auto scan – a so-called blind scan, which consists in an automatic search for available
satellite frequencies, which are then scanned in turn.
2. Preset scan – according to the TP list – the receiver searches through only frequency by
frequency, in accordance with a list recorded for the selected satellite. This list may be
edited in a separate menu.
3. FastScan - receiver scans the channels of the selected provider bucket. You can add
channels to an existing list or replace an existing list. Please note that the search result
and working of this function depends solely on the provider.
11.5 Multi satellite search
In this menu you can search for channels from a few satellites. The satellites will be searched
automatically one after another in the order in which they were entered in the list of satellites.
Options concerning settings and search functions are the same as in the menu: search one
satellite. The names of satellites that are to be searched are visible in the lower part of the
window.
19