Ferguson AC 8000 PVR - Manual (Page 43)

Ch6. Appendix | 43
4.13.4 Recorded File Playback
You can play the recorded file by selecting a desired file.
1. Press the “PVR” button to display the file list. Or press the “OK” button during the playback.
2. Select the desired file to playback using the “▲▼” button, and then press the “OK” button.
z Red: Locks/unlocks the specified
file.
z Green: Deletes the specified file.
z Yellow: Renames the specified
file.
z Blue: Shows the Options(Sorts
the files, creates older, and moves
file to folder) .
:
① You can record the playback file during the playback. ② The file name on recording is in
different color. ③ You can’t change the channel during the recorded file playback. You should stop
the playback, and then change the channel. ④ If you choose the recording file, the channel is
changed to the same channel.
3. Press the “ ” button to display the progress bar. And you can perform time shift operations like
VCR functions such as slow rewind/forward ( ) , pause ( ) , repeat( ), and replay( ).
: How to Repeat A-B
You can select a specific block within a recorded file and play it back repeatedly.
① Press the “ ” button to display the progress bar. ②!Press the “ ” button to set the start
position. ③ Move to the desired position using the “◀▶” button. ④ Press the “ ” button again
to set the end position.
Then the program plays the selected block repeatedly. If you stop the repeat mode, press the “ ”
button during repeating the selected block.
4. Press the “
” button to stop the playback, and you can watch the current channel on air.