ROTHENBERGER ROCUT XL - Manual (Page 7)

ENGLISH 5
Î Raise the blade (6) by turning the handle (2).
Î Release the lock (1).
Î Remove the pipe cutter from the tube.
Changing the blade
Caution: Always wear gloves during the operation of the guillotine pipe cutter. In this
way you will avoid seriously injuring yourself.
Î Open the lock (1).
Î Open the lower body (7).
Î Lower the blade holder (5) to the maximum by turning the handle (2).
Î Unscrew the 2 screws (8) with an Allen key.
Î Remove the blade (6) with care.
Î Put the new blade in place.
Î Tighten the screws (8).
Care and maintenance
• Clean the pipe cutter lubricator regularly.
• Grease the lubricator regularly.
Accessories
The relevant accessories and an order form can be found from Page 28 onwards.
Disposal
Components of the unit are recyclable material and should be put to recycling. For this purpose registered
and certified recycling companies are available. For an environmentalfriendly disposal of the non-recyclable
parts (e.g. electronic waste) please contact your local waste disposal authoritye.