American Power Conversion Bypass Static - Manual (Page 22)

UPS Display: Network Configuration Screens
16 Symmetra® MW with Internal Bypass Static Switch - User Guide - 990-1756A-001
Host Name Settings.
• Host name: The network host name for the system. This uniquely identifies the system on the
network. Standard letters (a-z and A-Z), digits (1-9) and hyphen (-) can be used.
• Domain name: The DNS network domain that the UPS is on. Standard letters (a-z and A-Z),
digits (1-9) and hyphen (-) can be used.
SMTP Settings.
• From address: The from address to be used when sending e-mails.
• SMTP server: The SMTP server responsible for sending e-mails.
•
Select the Apply Changes button when all information has been entered.
E-mail Settings screen
From the E-mail Settings screen, configure the e-mail recipients to be notified of alarms, which may
occur on the system. The severity of the alarms may be informational, warning or severe and can be
specified for each E-mail recipient. Up to 25 e-mail recipients can be entered.
• Enable E-mail: Enable the e-mail notifications by selecting this checkbox.
• To add a new e-mail recipient, touch the Add New button, type in the e-mail address and specify
the minimum severity of alarm.
• To edit or delete an e-mail recipient, select the recipient as they appear in the recipient list.
Choose to either update or delete the recipient.
Note
Network Settings information must be configured prior to enabling e-mail.
Normal Normal
Network Configuration
5.34 PM
Page 2 of 5
Add new
Send Test E-mail
1 of 25 addresses
Informational
Warning
Severe
E-mail Recipient(s) Severity
E-mail Settings