ROTHENBERGER Thermodrucker User Manual
Page 10
8
ENGLISH
•
Printing stops before all information on a line has been completed.
•
The battery condition reference (shown at the end of the self-test) is 1 or 0.
In order to prolong battery life please note that it is suggested that you set the print contrast to
the lightest readable setting and ensure that the printer is turned off once you have finished
printing.
Remove the batteries from the printer if you are not planning to use the unit for a long period of
time.
Controlling the print head
If you turn the printer off whilst printing, the print head may stop in the middle of the line. To re-
turn the print head to the left side of the paper, turn the printer on, then off.
Missing or misformed characters
The ▓ character is printed if information is lost because the printer cannot print fast enough to
keep up with incoming data.
The █ character will show on the print out if the printer has detected incorrect data due to inter-
ference with, or interruption to, the stream of incoming information.
Common causes for this error:
•
Incorrect positioning of printer with reference to the instrument or due to the distance or the
angle of operation.
•
Obstruction of the infrared signal or even interference from another infrared emitting source.
8
Accessories
Accessory Name
ROTHENBERGER Part Number
Paper roll for thermal printer (4 rolls)
No. 61043
9
Customer service
The ROTHENBERGER service locations are available to help you (see listing in catalog or on-
line) and replacement parts and service are also available through these same service locations.
Order your accessories and spare parts from your specialist retailer or using our service-after-
sales hotline:
Phone:
+ 49 (0) 61 95 / 800
– 8200
Fax:
+ 49 (0) 61 95 / 800
– 7491
Email:
www.rothenberger.com
10
Disposal
Components of the unit are recyclable material and should be put to recycling. For this purpose
registered and certified recycling companies are available. For an environmental friendly dispos-
al of the non-recyclable parts (e.g. electronic waste) please contact your local waste disposal
authority.
Old batteries can be taken to your specialist dealer who will dispose of them in conformity with
environmental regulations.
For EU countries only:
Do not dispose of electric tools with domestic waste. In accordance with European
Directive 2012/19/EC on waste electrical and electronic equipment and its implementa-
tion as national law, electric tools that are no longer serviceable must be collected
separately and utilised for environmentally compatible recycling.