Argus DC 1600 - Manual (Page 3)

Digital Camera User Guide
License Agreement
Microsoft, Windows, Windows 95, Windows 98, Windows NT, Me are registered trademark of
Microsoft Corporation. Pentium is a registered trademark of Intel Corporation. The TWAIN driver
and the AVI Creator is developed by VLSI Vision Ltd.,UK. The Photo Fantasy, Photo Printer and
Photo Studio is licensed by Arcsoft, USA.
All other product names mentioned here in are trademarks or registered trademarks of their
respective owners.
Electromagnetic Compatibility Notice
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy, and if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If the unit does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
Re-orient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or any experienced TV/radio technician for help.
Caution
In order to maintain compliance with FCC regulations, shielded cables must be used with
this equipment. Operation with non-approved equipment or unshielded cables is likely to
result in interference to radio and TV reception.
To comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules, this
device must only be installed on computer equipment certified to comply with the Class B limits.
In addition, only the supplied power cables should be used with the product. Operation with non-
certified computers, use of a cable other than that supplied, or modification of the device may result
in interference to radio or television reception and could void the user’s authority to operate this
device.
Attention
Thank you for selecting Digital Camera. Please read the instructions carefully for a thorough
understanding before taking pictures.
•
This camera is not resistant to water and should not be used outdoors in snow or rain. If
accidentally dropped in water, please quickly pour out the water. Let it to dry by sunlight or
by air-blower.
• Protect it from excessive humidity. It will wet the lens and picture will be blured.
• Do not attempt to disassemble the camera yourself. Always take it to an authorized service
facility for repair.
• Remove the batteries if you do not expect to use the camera for 1 month or longer.
• To store the camera, wrap it in a clean, soft cloth and place in a cool, dry, dust-free place.
Also it should not be placed in a very hot temperature condition or in direct sun light.
• The battery may explode or cause burns if disassembled, recharged, shorted, exposed to high
temperature, or disposed of in fire.
• Take care on the lens. Use special cloth to clean it.
• Condensation is a problem when bringing cold equipment into a warm room. Try to put the
camera in plastic bag so condensation forms on the outside of the bag.
• If nothing at all is displayed in the LCD panel, the battery may be inserted in opposite polarity.
• Turning off the power will cause the loss of all stored photos. Make sure you have uploaded
the photos to the PC before turning the power switch to Off.
• You will hear a ‘Gi’ sound and the camera will not function to take a photo if the environment
is too dark or too bright. It will operate properly for normal light intensity.
1