Ampeg Svt-Cl - Manual (Page 11)

SVT-CL Bass Guitar Amplifier
11
Service Information
If you are having a problem with your SVT-CL amplifier, you can go to our website
(www.ampeg.com) and click on Support for service information, or call Technical Support
at 1-800-898-3211 Monday-Friday during normal business hours, Pacific Time, to receive
assistance. If you are outside of the U.S., contact your local distributor for technical support
and service.
SVT-CL TECHNICAL SPECIFICATIONS
Preamp Tube 2 x 12AX7
Driver Tube 1 x 12AX7, 2 x 12AU7
Power Amp Tube 6 x 6550
Output Power Rating 300 watts rms minimum continuous @ <3% THD
into 2 or 4 ohms, 0.4VRMS input
Signal to Noise Ratio 80 dB (20 Hz–20 kHz, unweighted)
Maximum Gain 67 dB @ 1 kHz, tones centered
-3 dB @ 40 Hz and 15 kHz
Tone Controls Bass: +12/–12 dB @ 40 Hz
Midrange: +10/–20 dB @ 220 Hz, 450 Hz,
800 Hz, 1.6 kHz or 3 kHz
Treble: +15/–20 dB @ 4 kHz
Ultra Lo: +2 dB @ 40 Hz, -10 dB @ 500 Hz
Ultra Hi: +9 dB @ 8 kHz
Power Requirements US: 10A(Slo Blo), 120VAC, 50-60Hz, 460W
BZ: 10A(Slo Blo), 120VAC, 50-60Hz, 460W
JP: 10A(Slo Blo), 100VAC, 50-60Hz, 460W
EU/UK: 4A(Slo Blo), 220-240VAC, 50-60Hz, 460W
AU: 4A(Slo Blo), 240VAC, 50-60Hz, 460W
Size (H x W x D) 11.5 in/292 mm (with feet) x 24.0 in/610 mm
x 13.0 in/330 mm
Weight 80 lb/36.3 kg (approximately)
Speakon ® is a registered TM of Neutrik AG
The SVT-CL is covered with a durable fabric-backed vinyl material. Clean with a dry lint-free cloth.
Never spray cleaning agents on the SVT-CL. Avoid abrasive cleansers which would damage the finish.
Ampeg continually develops new products and improves upon existing ones. For this reason, the specifications
and information in this manual are subject to change without notice.
“Ampeg” is a registered trademark of LOUD Technologies Inc. All other brand names mentioned are trademarks
or registered trademarks of their respective holders and are hereby acknowledged.
www.ampeg.com
©2013 LOUD Technologies Inc.
16220 Wood-Red Road NE • Woodinville, WA 98072
Part No. SW0975 Rev. A 03/13