Indesit DIS-361-A - Manual (Page 16)

EN
16
Loading the racks
Before loading the racks, remove all food residues from
the crockery and empty liquids from glasses and cups.
Arrange the crockery so that it is held in place firmly and
does not tip over.
After loading the appliance, check that the sprayer arms
can rotate freely.
Lower rack
The lower rack can hold pans, lids, plates, salad bowls,
cutlery, etc. as seen in the
Loading examples.
Plates and large covers should be placed at the sides of
the rack, ensuring that they do not block the rotation of the
upper sprayer arm.
Some dishwasher models are fitted
with tip-up sections
*
, which can be
used in a vertical position when
arranging plates or in a horizontal
position when arranging pans and
salad bowls.
Cutlery basket
The type of cutlery basket may vary according to the
dishwasher model: The cutlery basket should be positioned
at the front of the lower rack, by sliding it between the fixed
inserts, or on the upper rack when the half load option has
been selected (in models featuring this option).
- It has a collapsible
sliding system which
means the cutlery can
be arranged in the best
possible way.
Knives and other utensils with sharp edges must be placed
in the cutlery basket with the points facing downwards, or
they must be positioned horizontally in the tip-up
compartments on the upper rack.
Cutlery basket positioning examples
Upper rack
Load this rack with delicate and lightweight crockery:
glasses, tea and coffee cups, saucers, small salad bowls,
saucepans and small saucepans which are not too soiled,
using the
Loading examples as a guide.
• Mugs and cups, long sharp knives and serving utensils:
place these on the tip-up compartments
**
.
Tip-up compartments with adjustable tilt*
- The tilt feature can be used to increase the space in the
upper rack, to position wine glasses with different stem lengths
safely and to improve drying performance.
-Lift the tip-up compartment, slide it gently and position it in
the desired tilt angle.
Adjusting the height of the upper rack
In order to make it easier to arrange the crockery, the upper
rack may be moved to a higher or lower level.
The height of the upper rack should ideally be adjusted
WHEN THE RACK IS EMPTY.
Never lift or lower the rack on one side only.
Open the left and right guide rail
stops and pull out the rack; position
it higher or lower as required, slide
it along the guide rails until the front
wheels are in place and close the
stops (
see figure).
If the rack is fitted with Dual Space
handles
*
( see figure), pull out the
upper rack until it reaches its stop
point, grip the handles at the sides of
the rack and move it upwards or
downwards, then slowly let it fall back
into place.
Loading examples for the upper rack
Loading examples for the lower rack
Items which should not be washed in the
dishwasher
• Wooden items, objects with wooden or horn handles or
glued-on parts.
• Items made from aluminium, copper, brass, pewter or tin.
• Items made from plastic material which is not heat-resistant.
• Antique or hand-painted porcelain.
• Antique silver. Silver which is not antique may, however, be
washed in the dishwasher using a delicate wash cycle,
provided that it does not come into contact with other metals.
We recommend the use of crockery which is dishwasher
safe.
*
Only available in selected models.
**
The number and position may vary.
Tilt A Tilt B Tilt C