Indesit BAAN-40-FNF-D-(1) - Manual (Page 52)

52
GB
Installation
! Before placing your new appliance into operation please read
these operating instructions carefully. They contain important
information for safe use, for installation and for care of the
appliance.
! Please keep these operating instructions for future reference.
Pass them on to possible new owners of the appliance.
Positioning and connection
Positioning
1. Place the appliance in a well-ventilated humidity-free room.
2. Do not obstruct the rear fan grills. The compressor and
condenser give off heat and require good ventilation to
operate correctly and save energy.
3. Leave a space of at least 10 cm between the top part of
the appliance and any furniture above it, and at least 5 cm
between the sides and any furniture/side walls.
4. Ensure the appliance is away from any sources of heat
(direct sunlight, electric stove, etc.).
5. In order to maintain the correct distance between the
appliance and the wall behind it, fit the spacers supplied in
the installation kit, following the instructions provided.
Levelling
1. Install the appliance on a level and rigid floor.
2. If the floor is not perfectly horizontal, adjust the refrigerator
by tightening or loosening the front feet.
Electrical connections
After the appliance has been transported, carefully place it
vertically and wait at least 3 hours before connecting it to the
electricity mains. Before inserting the plug into the electrical
socket ensure the following:
• The appliance is earthed and the plug is compliant with the
law.
• The socket can withstand the maximum power of the
appliance, which is indicated on the data plate located on
the bottom left side of the fridge (e.g. 150 W).
• The voltage must be in the range between the values
indicated on the data plate located on the bottom left side
(e.g. 220-240V).
• The socket is compatible with the plug of the appliance. If
the socket is incompatible with the plug, ask an authorised
technician to replace it (see Assistance). Do not use
extension cords or multiple sockets.
! Once the appliance has been installed, the power supply
cable and the electrical socket must be easily accessible.
! The cable must not be bent or compressed.
! The cable must be checked regularly and replaced by
authorised technicians only (see Assistance).
! The manufacturer declines any liability should these
safety measures not be observed.
Accessori
RIPIANI: pieni o a griglia.
Sono estraibili e regolabili in altezza grazie alle apposite
guide (vedi figura), per l’inserimento di contenitori o alimenti di
notevole dimensione. Per regolare l’altezza non è necessario
estrarre completamente il ripiano.
Contenitore FLEX COOL BOX
È il nuovo contenitore per mantenere freschi carne, pesce,
formaggi. Se collocato nella parte “bassa” del ripiano frigo
è l’ideale per carne e pesce; se spostato nella parte “alta”
è ottimo per formaggi. Se non è necessario, può essere
comodamente estratto dal frigo.
Balconcino PORTALATTINE: per riporre orizzontalmente più
lattine (vedi figura). Vi si possono riporre anche yogurt, burro o
contenitori in genere.
Filtro anti-odori
*
Alcuni modelli sono dotati di un filtro anti-odori a carboni
attivi, che assicura una migliore qualità dell’aria all’interno
del frigorifero. Il filtro è collocato in basso a destra, dentro la
bocchetta di aerazione.
Freezer compartment
ICE CARE tray
The fact that they are situated on the top part of the freezer drawers
ensures greater cleanliness: the ice no longer comes into contact
with the food placed inside the freezer compartment; furthermore,
the dripping of the water during filling is avoided (a lid to cover up
the hole after filling with water is also provided).