Indesit FI-20.A-(WH)-1-S - Manual (Page 18)

18
GB
Before connecting the appliance to the power supply, make sure that
• The appliance is earthed and the plug is compliant with the law.
• The socket can withstand the maximum power of the appliance, which is
indicated on the data plate.
• The voltage is in the range between the values indicated on the data plate.
• The socket is compatible with the plug of the appliance. If the socket is
incompatible with the plug, ask an authorised technician to replace it. Do
not use extension cords or multiple sockets.
! Once the appliance has been installed, the power supply cable and the
electrical socket must be easily accessible.
! The cable must not be bent or compressed.
! The cable must be checked regularly and replaced by authorised technicians
only (see Assistance).
! The manufacturer declines any liability should these safety measures
not be observed.
Dimensions*
(With self-cleaning
panels)
width 43,5 cm
height 32,4 cm
depth 40,6 cm
Volume* (With
self-cleaning panels) 58 lt.
Dimensions**
(With self-cleaning
panels)
width 45,5 cm
height 32,4 cm
depth 40,6 cm
Volume** (With
self-cleaning panels) 60 lt.
Electrical
connections
voltage: 220-240V~ 50/60Hz or
50Hz (see data plate) maximum
power absorbed 2250 W
ENERGY
LABEL
APPLIANCE SPECIFICATIONS
Dimensions*
width 43,5 cm
height 32,4 cm
depth 43,5 cm
Dimensions**
width 45,5 cm
height 32,4 cm
depth 43,5 cm
Volume* 62 lt.
Volume** 65 lt.
* Only for models with drawn rails.
** Only for models with wire rails.
Directive 2002/40/EC on the label
of electric ovens.
Standard EN 50304
Energy consumption Class
cerification Natural convection
heating mode: Traditional
mode.
This appliance conforms to the
following European Economic
Community directives:
- 2006/95/EEC dated 12/12/06
(Low Voltage) and subsequent
amendments
- 2004/108/EEC dated 03/05/89
(Electromagnetic Compatibility)
and subsequent amendments
- 93/68/EEC dated 22/07/93 and
subsequent amendments.
- 2012/19/EC and subsequent
amendments.