Indesit KN3T76SA(X)-U-S User Manual

Page 16

Only available in certain models.

Any necessary modifications can be made by
repeating the above process.

Timer feature

This function may be accessed by pressing the n

button, after which the display will show the symbol
n

. Every time the + button is pressed it

corresponds to a time increase of 10 seconds, until
it reaches 99 minutes and 50 seconds. After this
point, each press of the button represents an
increase of one minute, up to a maximum of 10 hours.
Pressing the - button reduces the time.
After the time period has been set, the timer will
begin to count down. When the timer reaches zero,
the buzzer will sound (this may be stopped by
pressing any button).

The time may be displayed by pressing the

button, and the n

symbol indicates that the timer

function has been set. After approximately 7 seconds,
the display will automatically revert to the timer.

Cancelling a time that has already been set

Press the - button until the display shows 0:00.

0:00.

Adjusting the buzzer volume

After selecting and confirming the clock settings,
use the - button to adjust the volume of the alarm
buzzer.

Planning cooking with the electronic

programmer*

Setting the clock
After the appliance has been connected to the
power supply, or after a blackout, the display will
automatically reset to 0:00 and begin to blink. To set
the time:
1. Press the COOKING TIME button

and the

COOKING END TIME

simultaneously.

2. Within 4 seconds of having pressed these
buttons, set the exact time by pressing the + and -
buttons. The + button advances the hours and the

button decreases the hours.
Once the time has been set, the programmer
automatically switches to manual mode.

Setting the timer
The timer enables a countdown to be set, when the

! Do not place flammable materials in the lower oven
compartment.

! The internal surfaces of the compartment (where
present) may become hot.

Practical cooking advice

! Do not place racks in position 1 or 5 during fan-assisted
cooking. Excessive direct heat can burn temperature
sensitive foods.

MULTI-COOKING
• Use positions 2 and 4, placing the food that requires

more heat on the rack in position 2.

• Place the dripping pan on the bottom and the rack on top.

GRILL
• When using the GRILL and DOUBLE GRILL cooking

modes, place the rack in position 5 and the dripping
pan in position 1 to collect cooking residues (fat and/or
grease). When using the GRATIN cooking mode, place
the rack in position 2 or 3 and the dripping pan in
position 1 to collect cooking residues.

• We recommend that the power level is set to maximum.

The top heating element is regulated by a thermostat
and may not always operate contantly.

PIZZA OVEN MODE
• Use a light aluminium pizza pan. Place it on the rack

provided.

For a crispy crust, do not use the dripping pan as it

prevents the crust from forming by extending the total
cooking time.

• If the pizza has a lot of toppings, we recommend

adding the mozzarella cheese on top of the pizza
halfway through the cooking process.

Electronic timer*

This function displays the time and works as a timer
which counts down to zero.
! All functions will be implemented approximately 7
seconds after they have been set.

Resetting the clock

After the appliance has been connected to the power
supply, or after a power cut, the clock display will
begin to blink, showing the figure: 0:00

0:00

• Press button

and then buttons

and

to set

the exact time. Press and hold the buttons to
quicken the count upwards.