Indesit IS70CUK - Manual (Page 11)

Troubleshooting
Problem:
The tumble dryer won’t start.
Its taking a long time to dry.
Possible causes / Solution:
● The plug is not plugged into the socket, or not making contact.
●
There has been a power failure.
●
The fuse has blown. Try to plug another appliance into the socket.
● You are using an extension cord? Try to plug the dryer’s power cord
directly into the socket.
●
The door is not closed securely?
● The TIMER knob has not been set properly ( see Start and Programmes ).
●
The START button has not been pressed ( see Start and Programmes ).
● The filter has not been cleaned ( see Maintenance ).
●
The water container needs emptying? The empty water light is on? ( see
Maintenance ).
● The condenser needs cleaning? ( see Maintenance ).
●
The temperature setting is not ideal for the type of fabric you are drying
(
see Start and Programmes, and see Laundry ).
● The correct drying time has not been selected for the load ( see Laundry ).
●
The air intake grille or rear vents are obstructed ( see Installation, and see
Maintenance ).
● The items were too wet ( see Laundry ).
●
The dryer was overloaded ( see Laundry ).
One day your dryer seems not to be working. Before you call your Service Centre ( see Service ), go through the
following troubleshooting suggestions:
GB
11