Indesit MWI212IXUK - Manual (Page 13)

13
GB
• BEFORE HOOK-UP
Warning:
Ensure that your appliance has not suffered
any damage during transport (deformed seal or
door, etc...). If you see any kind of damage,
before doing anything else, contact your retailer.
In order to easily locate the reference information
for your appliance, we recommend that you note
these data on the “After-Sales Service
Department and Customer Relations” page.
• ELECTRICAL CONNECTION
Ensure that:
- The electrical installation has sufficient voltage.
- The electrical wires are in good condition.
- The dia meter of the wires complies with the
installation requirements.
- Your electrical installation is equipped with 16-
ampere thermal-sensitive protection.
In case of doubt, consult your electrician-installer.
The electrical connections are made before the
appliance is installed in its housing.
Electrical safety must be provided by a correct
build-in. During installation and maintenance
operations, the appliance must be unplugged from
the electrical grid; fuses must be cut off or removed.
The oven must be connected with a power cable
(standardized) with three 1.5 mm2 conductors (1 ph
+ 1 N + ground) that must be connected to a
monophase 220-240 V network via a CEI 60083
standardised receptacle (1 ph + 1 N + ground lead)
or in accordance with installation rules. The safety
wire (green-yellow) is connected to the appliance’s
terminal
and must be connected to the ground
lead of the electrical set-up.
In the case of connections with an electric
receptacle, it must remain accessible after
installation of the appliance.
The oven’s neutral conductor (blue wire) must be
connected to the network’s neutral conductor.
In your electrical installation, allow for a user-
accessible device that must be able to separate the
appliance from the main power supply and whose
contact opening is at least 3 mm above all the
terminals.
If the power cable is damaged, it should be
replaced by the manufacturer, its after-sales service
department or by a qua lified person to avoid
danger.
Warning:
We cannot be held responsible for any
accident resulting from an inexistent, defective
or incorrect ground lead.
If the oven malfunctions in any way, unplug the
appliance or remove the relevant fuse at the
oven’s connection lead-in.
Installing y your a appliance