Indesit ISDG428P User Manual
Page 2

2 of 2
Rinsing
1. Before rinsing, reduce the load so that the drum is only two thirds full
2. Spin the soapy clothes for 2 minutes, stop the machine and re-arrange the clothes
3. Pour half a bucket of cold water over them ( Max – 5 litres)
4. Allow the water to drain through the clothes and re-spin for 1 ½ minutes
5. Repeat the process spin for 1 ½ minutes for each rinse until all traces of soap have been removed usually
3-4 rinses.
6. After the final rinse, spin the clothes according to the type indicated in the table.
7. Do not use more water than recommended, this may cause the machine to over flow.
8. Ensure the machine is pumped empty of water after each rinse process
This manual is related to the following products: