Agri-Fab 45-03201-062 - Manual (Page 8)

8
14. (Figure 10) Place the star washer (L) between the
height adjustment handle and the height adjustmenet
strap. Insert the 5/16" x 1" carriage bolt (F) through
the height adjustment handle, the star washer and the
height adjustment strap. Assemble a 5/16" flat washer
(K) and the plastic knob (X) onto the end of the bolt. ASSEmBLY OF HOPPER BAG
1. (Figure 11) Turn a rear hopper tube so that the brace
holes in the middle of the tube face down. Slide the
tube through the two loops sewn to the top rear seam
inside the hopper bag.
2. (Figure 12) Insert the two upper hopper side tubes
through the stitched flaps on each side of the hopper
bag.
3. (Figure 12) Assemble the ends of the rear hopper tube
onto the ends of the upper hopper side tubes. Fasten
together using plastic plugs (Z).
UPPER HOPPER
SIDE TUBE
PLASTIC PLUG (Z)
REAR HOPPER TUBE
(brace holes on bottom)
INNER BAG LOOPS
10 11
12
ENGLISH
5/16" FLAT
WASHER (K)
5/16" x 1"
CARRIAGE BOLT (F)
PLASTIC KNOB (X)
STAR WASHER (L)
(between strap and handle)