Nikon 16-35mm-f-4G-AF-S-VR-Zoom-Nikkor User Manual

Page 21

compensate using Custom Setting #18 on the
camera body.

See instruction manual of the camera body for
more details.

Blank box means not applicable. Since type M
screen can be used for both macro photography at
a magnification ratio of 1:1 or above and for
photomicrography, it has different applications
than other screens.
Important
• For F5 cameras, only EC-B, EC-E, B, E, J, A, L

focusing screens are usable in Matrix Metering.

Lens care

• Be careful not to allow the CPU contacts to

become dirty or damaged.

• If the lens mount rubber gasket is damaged, be

sure to visit the nearest Nikon-authorized service
representative for repair.

• Clean lens surfaces with a blower brush. To remove

dirt and smudges, use a soft, clean cotton cloth or
lens tissue moistened with ethanol (alcohol) or lens
cleaner. Wipe in a circular motion from the center
to outer edge, taking care not to leave traces or
touch other parts of the lens.

• Never use organic solvent such as thinner or

benzene to clean the lens.

• NC filters are available to protect the front lens

element. The lens hood also helps to protect the
front of the lens.

• When storing the lens in its flexible lens pouch,

attach both the front and rear lens caps.

• When the lens is mounted on a camera, do not

pick up or hold the camera and lens by the lens
hood.

• When the lens will not be used for an extended

period of time, store it in a cool, dry place to
prevent mold and rust. Be sure to store the lens
away from direct sunlight or chemicals such as
camphor or naphthalene.

• Do not get water on the lens or drop it in water

as this will cause it to rust and malfunction.

• Reinforced plastic is used for certain parts of the

lens. To avoid damage, never leave the lens in an
excessively hot place.

Standard accessories

• 77mm Snap-on Front Lens Cap LC-77
• Rear Lens Cap LF-1
• Bayonet Hood HB-23
• Flexible Lens Pouch CL-1120

Optional accessory

•

77mm screw-on filters