Audiovox VBP4000 - Manual (Page 10)

3. Installing the system on the back seat in a car (Refer to
Figure 9)
There is no need to remove the four straps from the bag as they
are not used in this installation.
Figure 9
Carefully place the system (front facing up) on the back seat. Guide
the vehicles safety belt through the short strap sewn on the back
of the bag. Then secure and adjust the safety belt so that the sys-
tem is not free to move around. Finally uncover the bag, swing
the monitor upward and adjust the screen for a desired viewing
angle. Ensure the inside Velcro strap of the bag is fastened to
prevent the unit from falling.
4. Installing the detached monitor onto the seat back in a car
(Refer to Figure 10)
Figure 10
10