Abocom SW1600R - Manual

16-Port Fast Ethernet
N-Way Switch
The Fast Ethernet 10/100Mbps N-Way Switch provides
you a flexible, reliable, and affordable solution of the
Ethernet network. It comes with sixteen independent
10BASE-T /100BASE-TX ports. Each port delivers up
to 200Mbps throughput, and is able to operate in either
half or full-duplex modes. The Fast Ethernet
10/100Mbps N-Way Switch also processes a N-Way
auto-negotiation function, which automatically adjusts
the device for optimum operation; ¡§ Store-and-
Forward¡¨ architecture filters to eliminate error packets
and improve efficiency, and MDI/MDIX auto crossover
technology provides for detecting a plugged straight
through or crossover Ethernet cable automatically. Plus,
the built-in 4M bits DRAM is smaller than the SRAM in
dimension and features very low power consumption.
Moreover, the built-in Universal Power Supply allows
you to install the Switch easily without the external
power adapter. Key Features & Specification
* Compliant with IEEE 802.3 10Base-T and IEEE
802.3u 100Base-TX standards
* Supports store-and-forward
* 10/100Mbps port auto-detect on Full or Half
Duplex Mode
* IEEE 802.3x or Back Pressure (HDX) Flow Control
* Each Ethernet port supports MDI/MDIX auto
crossover capacity
* 16 (Sixteen) 10/100Mbps Auto-Detection ports
* Provides non-blocking and Head-of-line blocking
prevention
* Embedded 8K entries of look-up table and 128
entriesof CAM
* 4M bits DRAM is built in as package storage buffer.
Page based buffer management to efficiently utilize
the internal packet buffer.
* Broadcast storm filtering control
* Dimension (WxDxH): 225 x 126.8 x 44(mm)
* Built in Universal Power Supply: 90 ~ 264V
* 16 x RJ45 STP/UTP network ports on front panel
* Emission Certification: FCC/CE Class A
* Operating Environment:
Temperature: 0 ~ 40oC; Humidity: 5 ~ 90 % RH
* Support Windows NT4.x/98/98SE/ME/2000/XP