Asus K8V-X - Manual (Page 63)

ASUS K8V-X motherboard 2-27
2.5.5 APM Configuration
Power Management/APM [Enabled]
Allows you to enable or disable the Advanced Power Management (APM) feature.
Configuration options: [Disabled] [Enabled]
Power Button Mode [On/Off]
Allows the system to go into On/Off mode or suspend mode when the power
button is pressed. Configuration options: [On/Off] [Standby] [Suspend]
Suspend Power Saving Type [C3]
Allows you to set the suspend power saving type.
Configuration options: [C3] [S1]
Restore on AC Power Loss [Last State]
When set to Power Off, the system goes into off state after an AC power loss.
When set to Power On, the system goes on after an AC power loss. When set to
Last State, the system goes into either off or on state whatever the system state
before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
Suspend Time Out [Disabled]
Allows you to select the specified time at which the system goes on suspend
mode. Configuration options: [Disabled] [1 Min] [2 Min] [4 Min] [8 Min] [10 Min]
[20 Min] [30 Min] [40 Min] [50 Min] [60 Min]
The following items appear only when the Power Management/APM item is set
to [Enabled].
Power Management/APM [Enabled]
Power Button Mode [On/Off]
Suspend Power Saving Type [C3]
Restore on AC Power Loss [Last State]
Suspend Time Out [Disabled]
Hard Disk Time Out (Minute) [Disabled]
Video Power Down Mode [Suspend]
Hard Disk Power Down Mode [Enabled]
Power On By RTC Alarm [Disabled]
Power On External Modems [Disabled]
Power On PCI Device [Disabled]
Power On PS/2 Keyboard [Disabled]
Power On PS/2 Mouse [Disabled]