Audiovox FR-1500XTM - Manual (Page 20)

20
STOPWATCH MODE
The stopwatch mode provides you with the capability of timing certain external func-
tions without the need for a separate time piece. To use the stopwatch feature, proceed
as follows:
1. Press the Function (F) button 6 times; STOPWATCH appears on the display
momentarily, followed by eight zeros; each pair of zeros is separated by a colon
(:), signifying tenths-of-seconds, seconds, minutes and hours, right-to-left.
2. Press the right menu button to initiate the clock; the timing counter will
begin counting up. While timing is in progress, press the right menu button
again to stop the clock.
3. Press the right menu button to reset the stopwatch time to zero.
4. Press the left menu button to start and stop the timing counter, while the timing
is in progress, without resetting the timer function.
5. Press the Function (F) button to exit the stopwatch mode.
SETUP MODE
The SETUP mode is accessed by pressing the Function (F) button 7 times; this mode
contains a number of sub-modes designed to personalize the functions of your
FRS-1500XTM. These sub-modes consist of the following:
* Setting the Priority radio channel
* Setting the VOX delay time
* Choosing the Call melody
* Setting the ring vibrator on or off (or choosing both on)
* Setting Roger Beep on or off
* Setting the beep tone (key or button beep) on or off
* Setting the Quiet mode on or off
* Selecting a Time Out Timer setting (or none)
* Entering an identification name (ID) tag for your unit
PRIORITY CHANNEL SELECT
The priority channel is the radio channel that you and others in your group will be
monitoring for activity. To select the priority channel, proceed as follows:
1. With SETUP displayed, press the right menu button once; P.. CH appears
with the channel number flashing on the right.
2. Press the Up and Down buttons to select the priority channel you wish to
use.