AT&T 5800 - Manual (Page 6)

To Model 5830/5870/3358/3658B Base Unit
1 Make sure to charge the handset battery pack at least 12 hours.
2 At the cordless handset, use the softkey to select NEW.
3 Enter the 15-digit Base Unit ID Code located on the underside of your
Model 5830/5870/3358/3658B base.
4 Use the softkey to select OK. The screen displays PLEASE WAIT!!.
5 After about 45 seconds, the screen displays FOUND BASE. If the
handset displays BASE BUSY TRY LATER, the base is in use.
To Model 5840/5845 Base Unit
1 Make sure to charge the handset battery pack at least 12 hours.
2 At the 5840/5845 corded base, press .
3 Use or to select DISPLAY BASE-ID.
4 Press . The base screen will display the 15-digit Base ID code
for about 30 seconds, then return to the idle screen. Write down the
Base ID code so you can enter it at the handset in
STEP 6 below.
5 At the cordless handset, use the softkey to select NEW.
6 Enter the 15-digit Base ID code.
7 Use the softkey to select . The screen displays PLEASE
WAIT!! .
8 After about 45 seconds, the screen displays FOUND BASE. If the
handset displays BASE BUSY TRY LATER, the base is in use.
OK
OK
MENU
3
REGISTER THE HANDSET REGISTER THE HANDSET
REGISTER THE HANDSET
For complete operational instructions,
please refer to the manual that came
with your 5830/5840/5845/3358/3658B/5870 telephone
91-5785-10-ATT5806-manual 5/25/04 3:51 PM Page 3