Alto-Shaam Combitherm 4.10ESi - Manual (Page 7)

CT ExpRESS INSTALLATION MANUAL • 5 .
l i f t i n g i n s t r u c t i o n s
i n s t a l l a t i o n
remove banding before lifting.
lift the unit from either side of
the unit,
never from the
front or back .
adjust the forks so that they
do not damage any of the
components under the unit.
Air intake vents are
located in front of the legs
and must not be damaged.
The left and right fork should be
located between the front and
back legs and located as close to
the legs as possible.
lift the unit high enough to
remove the wooden pallet. have
a second person hold the unit to
prevent unit from shifting.
when moving the unit, drive
slowly, keep it low to the
ground, and use extreme caution.
c a u t i o n
TO PREVENT PERSONAL INJURY,
USE CAUTION WHEN MOVING OR
LEVELING THIS APPLIANCE.