Apple Bluetooth Headset - Manual (Page 6)

6
What Else You Can Do
To Do this
Answer incoming call Press button.
End current call Press button.
Decline incoming call Press button for about one
second, until you hear a
beep.
Switch to incoming or
on-hold call and put
current call on hold Press button.
Switch to incoming or
on-hold call and end
current call Press button for about one
second, until you hear a
beep.
Check whether
headset is turned on Press button.
If headset is on, status light
blinks green and headset
beeps.
Turn headset on Press and hold button for
about three seconds, until
you see the status light
blink green or hear four
rising tones.
Turn headset o∂ Press and hold button for
about four seconds, until
you see the status light
blink amber or hear four
falling tones.