Samsung LTP326WX-XAC - Manual (Page 41)

English- 38
O P E R AT I O N
Setting the Blue Screen Mode
If no signal is being received or the signal is very weak, a blue screen automatically
replaces the noisy picture background.
If you wish to continue viewing the poor picture, you must set the “Blue screen”
mode to “Off”.
1
Press the MENU button to
display the menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select “Blue
Screen”, then press the
ENTER
button.
3
Press the UP/DOWN
buttons to set Blue Screen
“On” or “Off”.
Press the EXIT button
to exit.
Pressing the UP/DOWN
buttons will alternate between
“On” and “Off”.
BN68-00653A-01Eng.qxd 5/7/04 9:04 AM Page 38