AEG LAVAMAT 135 EL - Manual (Page 12)

C DELAY START button (GEC IKTIRME TUÇU)
This button allows starting of the machine to be delayed from 1 hour
up to a maximum of 19 hours.
The button must be pressed before pressing the START/PAUSE
(START ARA VERME) button.
The figures indicating the required delay appear for about 2 seconds in
the display next to the button. The duration of the selected wash pro-
gramme is then displayed. After one minute, the machine starts its
countdown (every hour).
During the last hour, the remaining time is displayed every 5 minutes.
The delayed start function cannot be used with the SPIN (SIKMA) (K)
DELICATE SPIN (HASSAS SIKMA) (L) and EMPTY (BO
ÇALTMA) (J) pro-
grammes.
To modify or cancel the preset delay, press the START/PAUSE (START
ARA VERME) button, then press the DELAY START (GEC
IKTIRME TUÇU)
button until the required value is displayed or, if you wish to cancel the
delay, until the symbol
h is displayed.
Then press the START/PAUSE (START ARA VERME) button again.
When the delay is cancelled, the display shows the duration of the wash
programme previously selected.
D Display
The display shows the following information:
• if the programme selector knob is on the CANCEL ( IPTAL) position,
three flashing dashes appear immediately after pressing the ON/OFF
(AÇMA KAPAMA) button to indicate that the machine is ready to
receive instructions for the required wash programme;
• duration of the selected wash programme, calculated automatical-
ly on the basis of the maximum recommended load for each type of
fabric.
After the programme has started, the time remaining is updated every
10 minutes, and every 5 minutes during the last 20 minutes.
• When the programme has finished, three flashing zeros are
displayed;
• delayed start, programmed using the special button (C).
The selected delay (19 hours max.) is indicated in the display. The
countdown is updated every hour, and every 5 minutes during the last
hour.
54
Description of the appliance