Troubleshooting guide, 1 testing the product, 2 checking the resolution and frequency – Samsung LC24A650XS-ZA User Manual
Page 99: Troubleshooting, Guide, Testing the product, Checking the resolution and frequency
99
9 Troubleshooting Guide
9
Troubleshooting Guide
9.1
Requirements Before Contacting Samsung Customer
Service Center
9.1.1
Testing the Product
Before calling Samsung Customer Service Center, test your product as follows. If the problem persists,
contact Samsung Customer Service Center.
Check if your product is operating normally by using the product test function.
If the screen is turned off and the power indicator blinks even though the product is properly connected
to a PC, perform a self-diagnosis test.
1
Power off both the PC and product.
2
Disconnect the cable from the product.
3
Power on the product.
4
If the
Check Signal Cable
message appears, the product is working normally.
If the screen remains blank, check the PC system, video controller and cable.
9.1.2
Checking the Resolution and Frequency
For a mode that exceeds the supported resolution (refer to "10.3 Standard Signal Mode Table"), the
message
Not Optimum Mode.
will appear for a short time.