Actron Professional Enhanced Scan Tool 9640A - Manual (Page 30)

Using The Scan Tool
3 – 8 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
3
Changing the Vehicle
Changing vehicles erases all data
stored in the tool. The default is YES.
Press ENTER to continue.
Four Vehicle Options are available: General Motors, Ford, Chrysler and Global
OBD II. Global OBD II does not require additional information and takes you
directly to the function list. The other three require additional information so that
the tool can communicate with the vehicle. For example, select GENERAL
MOTORS.
The menus provide a list
of choices and reference
the vehicle’s VIN where
applicable. The VIN is vis-
ible from outside the vehi-
cle by looking through the
base of the front wind-
shield at the top of the
dashboard on the driver’s
side. Because manufac-
turers use different VIN
schemes, the tool will
indicate which digit of the
VIN to locate for informa-
tion such as Year, Make
and Engine.
Use UP/DOWN arrow
keys to move through the
list.
If you make a mistake,
press the
BACK key to
return to the previous
menu.
At the last screen, press
ENTER .
If a message displays, follow the instruc-
tions then press
ENTER .
✓
Vehicles manufactured from 2000 to present automatically use Global OBD
II Diagnostics even if GM, Ford or Chrysler was selected.
Picking New Vehicle
Erases All Stored
Data. Continue?
NO
Select Manufacturer
` General Motors
Ford [
Chrysler Select Vehicle Type
` Car
Truck
Select Year VIN 10
T=1996 ]
` S=1995 [
R=1994 Select Make VIN 3
3=Oldsmobile ]
` 4=Buick [
6=Cadillac Select Model
Park Avenue ]
` Regal [
Reviera Select Engine VIN 8l
` L=3.8L SFI
M=3.1L SFI 4T60E
M=3.1L SFI AUTO-3S 1995 Regal
L=3.8L SFI
CHANGE
Turn Key Off
For 10 Seconds
Then Turn Key On
Then Press ENTER