Atlantis Land A02-PSU - Manual (Page 20)

ENGLISH
21
1.6 Using The Utilities
This section describes the software utilities for the print
server:
• PS-Utility
• PS Wizard
1.6.1 Installing PS-Utility
Follow the procedure outlined below to install PS Utility:
1. Insert the print server’s Installation CD into the CD-ROM
drive.
2. Click Install Utility from the Auto-Run menu screen.
3. Once executed, the Setup program will extract files to
launch the InstallShield Wizard; then, follow it step by
step to complete the installation process
After installing the utility, the application program for the print
server is automatically installed to your computer, and
creates a folder in Start\Programs\PS-Utility. Now, you
can begin using PS Utility.
To avoid the conflict in your network,
you can use PS-Utility to change the
related settings of your print server
(such as the IP address) after finishing
the installation.
1.6.2 Launching PS-Utility
To launch PS Utility:
1. Click Start -> Programs -> PS-Utility, and then click the
PS-Utility v3.11 item.