Samsung HLT5675SX-XAA - Manual (Page 40)

English - 40
Setting the Default Channel List Mode
You can set All, Added, or Favorite to be the Default List that appears when you press the CH LIST button.
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Channel, then press the ENTER button.
2 Press the ▲ or ▼ button to select Channel List, then press the ENTER button.
3 Press the ▲ or ▼ button to select Default List Mode, then press the ENTER button.
Press the ▲ or ▼ button to select All, Added, or Favorite, then press the ENTER button.
➢ The Channel list you want to appear when you press the CH LIST button.
• All: Shows All the channels when you press the CH LIST button on the remote control.
• Added: Shows Added channels when you press CH LIST button on the remote control.
• Favorite: Shows Favorite channels when you press CH LIST button on the remote control.
Press the EXIT button to exit.
Press the CH LIST button on the remote control to bring up the Channel Lists.
Channel
Antenna : Air ►
Auto Program ►
Clear Scrambled Channel ►
Channel List ►
Name ►
Fine Tune ►
Signal Strength ►
LNA : On ►
Move Enter
Channel List
All
Added
Favorite
Default List Mode : All All
Added
Favorite
Move Enter
Return
Return
Labeling Channels - Analog
Channels can labelled so the their call letters appear whenever the channel is selected.
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Channel, then press the ENTER button.
Press the ▲ or ▼ button to select Name, then press the ENTER button.
2 Press the ▲ or ▼ button to select the channel to be assigned a new name, then press the
ENTER button.
3 Press the ▲ or ▼ button to select a letter, a number or a blank (Results in this sequence:
A~Z, 0~9, +, -, *, /, blank).
Press the ► button to switch to the next field, which will be selected.
Select a second letter or digit by pressing the ▲ or ▼ button, as above.
Repeat the process to select the last three digits. When you have finished, press the
ENTER button to assign the new name.
To erase the assigned new name, select Clear by pressing the ◄ or ► button, then press
the ENTER button.
Press the EXIT button to exit.
➢ The names of digital broadcasting channels are automatically assigned and thus
cannot be assigned by users.
Channel
Antenna : Air ►
Auto Program ►
Clear Scrambled Channel ►
Channel List ►
Name ►
Fine Tune ►
Signal Strength ►
LNA : On ►
Move Enter
Name
Clear
Clear
Clear
Clear
Clear Air 6
Air 7
Air 9
Air 11
Air 13
▼
▲
▼
▼
A
- - - - -
- - - - -
- - - - -
- - - - -
Adjust Move
Return
Return