Samsung LNS3238DX-XAA - Manual (Page 34)

English-32
Press the ANTENNA button on the remote control.
or
Setting the Channel Manager
1. Press the MENU button to display the menu.
Press the or buttons to select “Channel”, then press the ENTER button.
2. Press the or buttons to select “Channel Manager”,
then press the ENTER button.
3. Press the ENTER button to select “All”.
4. Press the or buttons to select a channel to delete,
then press the ENTER button.
Press the or buttons to select “Delete”, then press the ENTER button to
delete the channel.
You can add or delete a channel so only channels you want are displayed.
Selecting the Antenna
1. Press the MENU button to display the menu.
Press the or buttons to select “Channel”, then press the ENTER button.
2. Press the ENTER button to select “Antenna”.
Press the or buttons to select “Air” or “Cable”,
then press the ENTER button.
Press the EXIT button to exit.
If the antenna is connected to ANT 1 IN (AIR),
select “Air” and if it is connected to ANT 2 IN (CABLE),
select “Cable”.
If both ANT 1 IN (AIR) and ANT 2 IN (CABLE) are
connected, select the antenna input you want. If the antenna
input is not selected properly, noise may appear on the screen.
Channel Control
BN68-00883V-00Eng.qxd 10/1/04 10:57 PM Page 32