Samsung TXR2735X-XAA - Manual (Page 28)

29
ENG
Selecting the Sound Mode (depending on the model)
The “DUAL I-II” button displays/controls the processing and output
of the audio signal. When power is switched on, the mode is
automatically preset to either “Dual-I ” or “Stereo”, depending on
the current transmission.
➣
◆ If the receiving conditions deteriorate, listening will be
easier if the mode is set to the Mono.
◆ If the stereo signal is weak and an automatic switching
occurs, then switch to the Mono.
◆ When receiving a mono sound in the AV mode, connect
to the “AUDIO-L” input connector on the panel (front or
side). If the mono sound comes out only from left
speaker, press the DUAL I-II button.
Type of broadcast
Regular broadcast
(Standard audio)
Regular +
NICAM Mono
NICAM Stereo
NICAM Dual- I/II
Regular broadcast
(Standard audio)
Bilingual or Dual- I/II
Stereo
On-screen indication
Mono (Normal use)
Mono
↔
Mono
NICAM (Normal)
Stereo ↔ Mono
NICAM (Normal)
Mono (Normal use)
DUAL- I
↔ DUAL- II
Stereo ↔ Mono
(Forced mono)
Dual- I
→
Dual- II
→
Mono
NICAM NICAM (Normal)
NICAM
Stereo
A2
Stereo
→ →
KS7A(03415A)ENG_asia_TM75 3/19/04 11:20 AM Page 29