Acnodes PC 8150 User Manual
Page 61
Appendix
47
PC 8150 User’s Manual
all other devices remain active.
a Soft-Off by PWR-BTTN
This option only works with systems using an ATX power
supply. It also allows the user to define which type of soft
power OFF sequence the system will follow. The default value
is “Instant-Off”.
This option follows the conventional manner systems
perform when power is turned OFF. Instant-Off is a soft
power OFF sequence requiring only the switching of the
power supply button to OFF
Instant-Off
Upon turning OFF system from the power switch, this
option will delay the complete system power OFF
sequence by approximately 4 seconds. Within this
Delay 4 Sec.
delay period, system will temporarily enter into Suspend
Mode enabling you to restart the system at once.
a Wake-Up by PCI card
If enable this item, the system can automatically resume
when the PCI Modem or PCI LAN card receives an incoming
call.
a Power On by Ring
This option allows the system to resume or wake up upon
detecting any ring signals coming from an installed modem.
The default value is “Enabled”.
a Resume by Alarm
If enable this item, the system can automatically resume
after a fixed time in accordance with the system’s RTC
(realtime clock).
Press