Avanti Air Conditioner - Manual (Page 11)

11
AUTO Display
When this sequence is selected after pressing the MODE
button, the corresponding signal indiactor is lit.
In this mode, your unit will logically choose a desired
room temperature. If the temperature is not comfortable
for you, the desired MODE can be select manually.
FAN Display
When this sequence is selected the corresponding signal
indicator is lit, after pressing the mode button.
TEMPERATURE Display
When these buttons are pressed, the corresponding area
will show the selected temperature.
COOL Display
When this sequence is selected, after pressing the MODE
button, the signal indicator is lit. Then push the
temperature buttons to set the desired room temp.
HUMIDIFIER Display
When this sequence is selected after pressing the mode
button, the corresponding signal indicator is lit.
Under this mode, you cannot select a fan speed or a djust
the temperature since the fan motor operates at a pre-set
fan speed.