Avanti BCA193BG - Manual (Page 7)

7
IMPORTANT SAFETY INSTRUCTIONS

WARNING

To reduce the risk of fire, electrical shock,
or injury when using your appliance, follow
these basic precautions:
• Read all instructions before using the refrigerator.
• DANGER or WARNING: Risk of child entrapment.
Child entrapment and suffocation are not problems of the past. Junked or
abandoned refrigerators are still dangerous. . . even if they will “just sit in the
garage a few days.”
• Before you throw away your old refrigerator: Take off the doors. Leave the
shelves in place so that children may not easily climb inside.
• Never allow children to operate, play with, or crawl inside the refrigerator.
• Never clean refrigerator parts with flammable fluids. The fumes can create a fire
hazard or explosion.
• Do not store or use gasoline or any other flammable vapors and liquids in the vicinity
of this or any other refrigerator. The fumes can create a fire hazard or explosion.
-Save these instructions-
Free Standing Units
To ensure not only the efficient operation of your unit but also your safety.
When installing your unit follow the steps as shown below:
• Place your unit on a flat level surface that is strong enough to support the unit once it is fully
loaded.
• Your unit is equipped with adjustable height leveling legs to accommodate any minimal changes in
the level of the surface on which it is installed.
Countertop / Table Top Units
• When installing units that can be placed on countertops, keep the following in mind:
• Surface (countertop) is flat, level, and strong enough to support the unit once it is fully loaded.
• Surface is wide enough to accommodate the unit without any overhang.
• Surface is deep enough to accommodate the unit when the door is opened to 90º
INSTALLATION INSTRUCTIONS
 Before Using Your Unit
• Remove the exterior and interior packing.
• Check to be sure you have all of the following parts:
• 2 Shelves
• 1 Instruction Manual
• Before connecting the unit to the power source, let it stand upright for approximately 2 hours.
This will reduce the possibility of a malfunction in the cooling system from handling during
transportation.
• Clean the interior surface with lukewarm water using a soft cloth.