Avanti W789SA - Manual (Page 14)

14
Operation Instructions
Press down power button.
Press down water level button.
Choose appropriate water level according to wash load quantity and then the corresponding indicator
blink.
Water temperature choice
Push down the water temperature choice button, you can choose to inlet cold water or hot water.
When the cold -water indicator and the hot-water indicator turn on simultaneously, which means you
chose the warm water.
NOTE: The washer will provide a cold rinse in all TEMPERATURE settings.
IMPORTANT: A single cold hose system does not allow the washing machine to automatically
(select) regulate incoming water temperatures to match those listed on the control panel such as
WARM or HOT.
Press down program select button.
Choose appropriate program mode according to wash load quantity and then the corresponding
indicator blink.
Press down function select button.
Choose the desired function group and then the corresponding indicator blink.
Press down Start/Pause button once and the machine will begin operation.
Please press this button to stop the normal operation, if it continues to work, press it again.
Water level can be reset during the normal operation. If the higher water level i s selected, the machine
will operate after refilling the water.
Functions
Each wash set is programmed in the computer; see the details in the wash program chart.
Press down each button within 5 minutes since the program will reset the process group. Then press
down “Start/Pause” button to re -start the washing machine. If not, the washing machine will shut down
automatically.
Close the lid, or the washing mac hine will not operate .
Note:
Clothes easily discolored should be washed separately so as to prevent inter -dyeing.
?
If you want to change a selected program, please press the Start/Pause button first, then press
the Program button before pushing Start/Pause button.
?
When Rinse & Drain program is on, do not use detergent.
?
If you want to drain water during washing, press th e Start/Pause button, then select Rinse and
Drain program. Press Start/Pause button again to restart.
?
If you open the lid while the machine is running, all operations will be stopped within 7 seconds.
?
To resume operation close the lid.
SOAK WASH RINSE SPIN
Normal 20 Minutes 12 Minutes 2 Cycles 5 Minutes
Hard 30 Minutes 12 Minutes 2 Cycles 5 Minutes
Speedy 10 Minutes 5 Minutes 1 Cycle 2.5 Minutes
Gentle 10 Minutes 4 Minutes 2 Cycles 5 Minutes