Audiovox GMRS-1535 - Manual (Page 16)

16
To enable and disable the Roger Beep tone:
- From GMRS standby mode, press the MODE Button 7 times until rb
appears on the display with the flashing Roger Beep icon ( ) and
On or oF.
- Press the Up or Down Button to select the tone on or off as desired.
- When enabled, the tone icon ( ) appears steady on the display.
- Press the Power On/Off button momentarily to confirm selection.
Call Ringer Selection Mode
The transceiver provides 5 user-selectable call ringer melodies to alert
you to an incoming call.
To select your favorite call ringer melody:
- From GMRS standby mode, press the MODE button 8 times;
CA will appear on the display, together with a flashing number be
tween 1 and 5, and an appropriate call ring.
- Press the Up or Down Button to preview and hear the 5 available call
melodies.
- Press the Power On/Off button momentarily to confirm selection.
Refer to the PTT button (4) to transmit ring signal.
Auto Key Lock Selection Mode
This feature prevents accidental channel change to the preferred settings
of the unit. The Auto Key Lock function temporarily disables the Up, Down
and Mode Buttons.
To access the Auto Key Lock selection menu:,
- From GMRS standby mode, press and hold the Scan Button for over
2 seconds to Lock the Auto Key function; the ( ) icon appears on
the display.
- The PTT and Monitor Buttons are not effected.
- To unlock the Auto Key function, press and hold the SCAN button for
at least 2 seconds; the icon ( ) disappears from the display.