Set up, Connecting the monitor – Samsung LH19ISBBHQ-XAX User Manual
Page 14
Connecting
the Monitor
Installing the
Monitor Driver
Base Installat ion
Ge nera l
BNC C onne cto rs (Option)
General
1. Connect the power cord for your monitor to the power port on the back of the monitor.
Plug the power cord for the monitor into a nearby outlet.
2. Connect the signal cable to the video port on your computer, video board, video card, or
graphics card.
3. If you are using a Macintosh computer, connect the cable to a Macintosh adapter, and set the
pins on your adapter(Adapter not included). A PC-compatible computer does not need an
adapter.
4. Turn on your computer and monitor. If your monitor displays an image, installation is complete.
BNC Connectors (Option)
1. Connect the power cord for your monitor to the power port on the back of the monitor.
Plug the power cord for the monitor into a nearby outlet.
2. Connect the end of the signal cable to your computer's video port(video board, video card or
graphics card).
3. If you are using a Macintosh computer, connect the cable to a Macintosh adapter, and set the
SyncMaster 797MB/997MB
SyncMaster 997MB