AT&T CL81211 - Manual (Page 15)

10
Handset settings
Use the menu to change the telephone settings.
1. Press MENU/
SELECT
when in idle mode (when the phone
is not in use) to enter the main menu.
2. Press q CID or pDIR to scroll to the feature to be changed.
When scrolling through the menu, the > symbol indicates the
selected menu item.
3. Press
MENU
/SELECT to select the highlighted item.
NOTE: Press
OFF
/CANCEL to cancel an operation, back up to the previous menu or exit
the menu display. Press and hold
OFF
/CANCEL to return to idle mode.
Ringer volume
You can set the ringer volume level (1-6) to one of six levels or turn the ringer
off. When the ringer is off,
appears on the screen.
1. Press MENU/
SELECT
in idle mode to enter the main menu.
2. Use q
CID
or p
DIR
to scroll to >Ringers, then press
MENU
/SELECT.
3. Press
MENU
/SELECT again to select >Ringer volume.
4. Press q
CID
or p
DIR
to sample each volume level.
5. Press
MENU
/SELECT to save your preference. There is a
confirmation tone and the screen returns to the previous menu.
NOTES:
The handset ringer volume also determines the ringer vol ume for
intercom calls.
If the ringer volume is set to off, that handset is silenced for all incoming calls.
However, the handset still plays the paging tone when responding to the
handset locator.
•
•
>Directory
Caller ID log
p
q
Telephone settings
> Ringer volume
Ringer tone
p
q
>Ringers
Intercom
p
q
RINGER VOLUME
p
q