NewAir Portable Dishwasher ADW-2600W - Manual (Page 11)

5. Starting a Wash Cycle
Wash Cycle Table
Note:
• Indicates that you will need to fill rinse aid dispenser
• *AHAM DW-1-2005: This program is the test cycle; the recommended rinse aid
dispenser setting is 6.
Program Cycle
Selection
Information
Description of Cycle Deterge
nt
Pre/Mai
n
Run
Time
(Minutes)
Energy
(Kwh)
Water
(Liters)
Rinse
Aid
Heavy For extremely
soiled loads
including
pots, pans
and dishes
with food that
has dried and
hardened.
Pre-wash
Pre-wash122º F(50º C)
Pre-Wash 122º F (50º C)
Wash140º F (60º C)
Wash 122º F (50º C)
Rinse
Rinse 149º F (65º C)
Drying
3/15g 110 0.499 15.9
Normal
*(AHAM)
For normally
soiled loads
including
plates,
glassware and
lightly soiled
pans. Pre-wash
Pre-wash
Pre-wash
Wash 131º F (55º C)
Rinse
Rinse149º F (65º C)
Drying
3/15g 85 0.344 13.6
Light For lightly
soiled loads,
including
plates,
glassware and
bowls.
Pre-wash
Pre-Wash122º F (50º C)
Wash122º F (50º C)
Rinse
Rinse 140º F (60º C)
Drying
3/15g 75 0.317 11.5
Speed For quickly
washing lightly
soiled loads
that do not
require drying.
Pre-Wash
Pre-Wash122º F (50º C)
Wash122º F (50º C)
Rinse
Rinse131º F (55º C)
15g 45 0.236 11.5
Soak For rinsing
dishes you
plan to wash at
a later time.
Pre-wash
N/A 10 0.01 2.5
Turning on the Appliance
To start a wash cycle:
Pull out the dishwasher basket. See section “Loading the Dishwasher Basket.”
Pour in dishwashing detergent. See section “Using Detergent.”
Insert the plug into appropriate outlet. Remember: the power supply is 120V/60 Hz.
Make sure that the water supply is turned to full pressure.
Select appropriate wash program.
Heavy Normal Light Speed Soak
Press the Start/Reset button. The dishwasher will start.
Note:
If you press the Start/Reset button while the dishwasher is running, the selected program light
will stop blinking and the dishwasher will beep every minute until Start/Reset is pressed again.
9