Nilfisk-ALTO SW 650S - Manual (Page 2)

Side brush is easily adjusted and
pulls debris away from walls,
kerbs, pallets and is easily
raised when not needed
SWEEPING BOTH INDOOR AND OUTDOOR
The SW 650S picks up paper, leaves – even small screws, nails and bolts, and the
machine is built to last. The handle is made of metal, while the hopper and other
key components are made of polyethylene – a robust material that won’t rust, chip,
dent or crack. This durable polyethylene is also exceptionally light, making the
SW 650S easy to push, pull and manoeuvre. Mechanically simple, it’s virtually service
free.
• Main brush flips up litter into the 40-litre hopper
• Rubber skirt keeps in dust and dirt
• Quiet and fume-free operation
• Large comfortable handle and large wheels make the machine easy to manoeuvre
TECHNICAL SPECIFICATIONS
Description Unit SW 650S
Productivity rate theoretical/actual m 2 /h 2000/1400
Working width w/right side brush mm 685
Hopper capacity litres 40
Wheel diameter mm 260
Main brush length mm 480
Side brush length mm 300
Width (with side brush) mm 762
Dimensions (l x w x h) cm 110x77x90
Dimensions w/side brush (l x w x h) cm 125x77x90
Weight kg 22.3
Years of
useful
service
www.nilfisk-advance.com
Hopper is light and easy to
remove and empty
96021920-06/02, © 2006.02Nilfisk-Advance Group, Printed in Denmark by Dronninglund Bogtrykkeri A/S
Nilfisk-Advance Limited,
Unit 24, Hillside Business Park
Kempson Way
Bury St. Edmunds,
Suffolk IP32 7EA
Tel. (01284) 763163
Fax (01284) 750562
www.nilfisk-advance.com