Audiovox HR7011PKG - Manual (Page 8)

8
ELECTRONICS INSTALLATION GUIDE
Monitor Unit Install Monitor Unit to Headrest
(Master Monitor) (Satellite Monitor)
(Master Monitor / M1) (Satellite Monitor / M2)
Monitor must be in closed
position. Insert Eject Card
at top slot to the end.
Hold the Eject Card then
press monitor and pull it
out.
1 2 3
4 5
Cable 1 :
Monitor Pigtail Cable
Cable 2 :
Headrest Cable
Match M1 monitor pigtail cable to M1 headrest cable
Match M2 monitor pigtail cable to M2 headrest cable
Press the release tab to release
the monitor completely.
Note: The HR7011M touch screen monitor has been designed to be interchangeable from one
headrest to the other.
The wireless FMM Interface Box automatically determines which headrest is M1 and which headrest
is M2 and sets each headrest to its own function (IR transmitter channel and IR receiver remote
control codes).
The headrests will still have the Red/Green and Blue/Yellow DIN cables on them and should be
connected to their respective connectors. In the event a touch screen monitor needs to be replaced,
simply order P/N HR7011M.