beautypg.com

3 before you start using your pressure washer – Nilfisk-ALTO C 105.5 User Manual

Page 6

background image

6

Nilfisk C 105.5 / C 115.3

EN

3 Before you start using your
pressure

washer

3.2 Mounting of quick

coupling

1. Screw the quick coupling

tight on to the water inlet (2).

Note: The inlet
fi lter (2a) must

always be fi tted

in the water inlet

pipe to fi lter out

sand, lime stone and

other impurities as these will
damage the pump valves.

Caution: Failure to fi t the fi lter
will invalidate the guarantee.

3.1

Mounting of trolley
handle (C 115.3)

3.3 Mounting of high pressu-

re hose on spray handle

1. Attach the high pressure

hose (4) to the spray handle
(7).

Detach the high pressure

hose by pressing the pawl
(A).

1. Place the trolley handle on

the machine.

2. Secure the handle by mount-

ing the 2 screws. Use the
enclosed hexagon key.

A

This manual is related to the following products: