Atlantis Land U-108 - Manual (Page 7)

Wireless 108Mbps USB Adapter
• After installing the driver of USB, there will be
another pop-up window to guide you to keep
installing the driver of USB Dongle.
• Click “Next >”. Select “Install the software
automatically (recommended)” then click
“Next>”. In next window, click “Continue
Anyway” then click “Finish”.
• To make sure if the installation is successful,
you could check it through the device
management.
1.4 Utility
Once the installation is successful, a utility program icon will
show on your desktop (108Mbps Wireless Network USB
Dongle Configuration Utility). To lunch the utility, just double
click the icon.
In the Configuration Utility, select “Site Survey” tab, and
click “Refresh” button to search the available wireless
network(s). Select the network you want.
1. If you have not enabled wireless encryption on
your network, then just click “Connect” button to
activate wireless connection immediately.
2. If the wireless encryption is enabled click
“Connect” button then choose encryption and
put correct password on the next page, then
click on Apply.
3. If doesn’t show any available wireless network,
click “Add” button to setup encryption and SSID.