Bodyline Products International AX-4330 User Manual

Page 13

Axis Edge |2| english

1. Remove the outer foil frame, outer foil frame and inner blade.

2. Use a flat blade screwdriver to remove the screw cap and side panels.
(See the illustration “A”.)

3. Loosen and remove the 3 screws with a Phillips screwdriver, and
remove the read case. (See the illustration “A”.)

4. Take out the Ni-Mh battery, and cut the lead wires. (See the illustration
“B”.) In doing so, take care not to short circuit the (+) and (-) terminals.

SPECIFICATIONS

> Power supply: rechargeable

battery/AC power supply

> Blade motion

Inner blade: reciprocating

Trimming blade: reciprocating

> Rated voltage: AC 100 V – 240V

> Rated frequency: 50/60 Hz
> Rated current: 200 mA
> Rated time: 5 minutes
> Standard recharging time: 1 hour
> Battery: Ni-Mh cell (enclosed type), 2 pcs.
> Battery voltage: 1.2 V x 2
> Weight: 180 g
> Operating temperature range:

0°C – 40° C

* The above specifications are subject to change without prior notice for