Controls configuration & adjustments – Aquacal Heat Pump User Manual
Page 57
57
To Complete the Adjustment Procedure– Either Brand Switch:
1. With electrical power remaining ON to the heater and heater operating, shut off the power to the
circulating pump. If the switch has been correctly adjusted, when the water pump stops, the
heater will shut off and the “FLO” code will display.
CAUTION: If the heater continues to operate with water pump off, readjust water pressure switch
to ensure heater will not run without water flow.
2. Reinstall heater front cover.
S
HOULD
ADJUSTMENT
OF
THE
WATER
PRESSURE
SWITCH
PROVE
UNSUCCESSFUL
,
CONTACT
A
QUA
C
AL
T
ECHNICAL
S
UPPORT
(727-823-5642)
;
SITE
-
SPECIFIC
FACTORS
MAY
REQUIRE
THE
INSTALLATION
OF
AN
EXTERNAL
FLOW
SWITCH
.
P-1, WPS Location
P-2, Len Gordon Style Switch
P-3, TecMark Style Switch
Controls Configuration & Adjustments...
Water Flow (Pressure) Switch Adjustment... continued: