Bodyline Products International AXIS AIR SHAVER AX-5330 - Manual (Page 16)

Axis Air |30| english Axis Air |31| english
> Follow the procedure below to disassemble the shaver with a
screwdriver.
1. Remove the outer foil frame, outer foil frame and inner blade.
2. Loosen and remove the 4 screws on the top and bottom of the
body with a Phillips screwdriver. (See the illustration “A”.)
3. Remove the side and rear panels. (See the illustration “A”.)
4. Loosen and remove the 6 screws with a Phillips screwdriver, and
remove the rear case. (See the illustration “B”.)
5. Cut the lead wires, and take out the Ni-Mh battery from the inner
case, while taking care not to short-circuit the (+) and (–) terminals.
(See the illustration “B”.)
SPECIFICATIONS
> Power supply: Rechargeable battery/AC power supply
> Blade motion:
> Inner blade: Reciprocating
> Trimming blade: Reciprocating
> Rated voltage: AC 100 V – 240V
> Rated frequency: 50/60 Hz
> Rated current: 200 mA
> Rated time: 5 minutes
> Standard recharging time: 1 hour
> Battery: Ni-Mh cell (enclosed type), 2 pcs.
> Battery voltage: 1.2 V x 2
> Weight: 202 g